Shop
18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- Low Profile (18mm)
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 12mm Pipe
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 3 Grooves at 200mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
25mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly
Ultra Low, Tile Direct, Overlay System for Existing Floors
The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on topFeatures:
- High Compressive Strength (300kPa)
- Tile Directly On Top
Specification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction:XPS - Grade 300 kPa
- Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
ThermRite™ 25mm Floating Floor Panel – 3 Grooves at 200mm centres – Standard Output- 1200x600mm
Ultra Warm Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on topSpecification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 3 grooves @ 200mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
ThermRite™ 25mm Floating Floor Panel – 4 Grooves at 150mm centres – High Output – 1200x600mm
Ultra Warm Overlay System for Existing Floors
The ideal solution for laying interlocking Wood and Laminate floor finishes directly on topSpecification:
- Size: Length- 1200, Width- 600, Depth- 25mm (Each panel = 0.72m²)
- Construction: EPS Board
- Thermal Conductivity: 0.036 W/mK
- Design: 4 grooves @ 150mm centres + radius returns with 3 straight runs at the top of each panel for flow and returns
- For 16mm Pipe
1.0m² @ 150watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 2.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 150 Watts
1.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 2.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 200 Watts
1.5m² @ 150watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 3.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 150 Watts
1.5m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 3.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 200 Watts
2.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 4.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 200 Watts
2.5m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 5.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
Click here for: ThermRite Mat Installation Instructions 200 Watts
3.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install
Dimensions: Length 6.0m, Width 0.5m
ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.
Simple Peel & Stick Installation - Full Self Adhesive Backing
A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.
The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.FEATURES:
- Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
- Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
- Full adhesive backing - Peel & Stick
- Suitable for tile, stone, slate and marble floor finishes
- Continuous metallic earth screen to ensure electrical safety
- Low build height - Minimal floor height build up
- Suitable for use in wet areas
- EMC Safe
- LIFETIME WARRANTY
