Showing 1–12 of 17 results

1.0m² @ 150watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£24.00 Excluding VAT

Dimensions: Length 2.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 150 Watts

1.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£30.95 Excluding VAT

Dimensions: Length 2.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 200 Watts

1.5m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£38.45 Excluding VAT

Dimensions: Length 3.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 200 Watts

2.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£45.95 Excluding VAT

Dimensions: Length 4.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 200 Watts

2.5m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£54.45 Excluding VAT

Dimensions: Length 5.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 200 Watts

3.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£61.95 Excluding VAT

Dimensions: Length 6.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 200 Watts

4.0m² @ 200watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£76.16 Excluding VAT

Dimensions: Length 8.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 200 Watts

Standard Manifold System – with Manual Air Vents

£70.00£230.00 Excluding VAT

Premium Stainless Steel, ThermRite™ Dualmix Manifold Assembly with Manual Air Vents 

- Pre-Assembled onto brackets for easy install

- Supplied complete with pipe connector cores 

Click Here For: PRODUCT DATA SHEET

Manifold Assembly Includes:

  • 2 x Manifold body (flow and return)
  • Lockshields with flow meters on each port (0-5 l/min)
  • 2 x Isolation ball valves
  • Manual adjustment valves on each port (interchangeable to actuators)
  • 2 x Water drain/fill valves with blank cap
  • 2 x Manual air vents
  • 2 x Metal fixing brackets
  • Pipe connectors (Eurocone Pipe Connectors)
  • Installation manual

1.5m² @ 150watts/m² ThermRite™ Mat – Full Self Adhesive Backing for Easy Install

£31.95 Excluding VAT

Dimensions: Length 3.0m, Width 0.5m

ThermRite™ Mat - Premium Quality, Self Adhesive electric underfloor heating mats.

Simple Peel & Stick Installation - Full Self Adhesive Backing

A low profile, easy lay, heating solution, consisting of a twin conductor heating cable (requiring connection at only one end) attached to a self adhesive fibreglass mesh.

The mat can simply be rolled out onto the floor, making installation quick and easy. The entire underside of the mat is fully adhesive, enabling them to be quickly and securely fixed to any clean surface.

FEATURES:

  • Approved to EN60335-2-96 as required by the 18th Edition Wiring Regulations (BS7671:2008)
  • Quick installation - Simply roll out the electric underfloor heating mat & fix to the floor
  • Full adhesive backing - Peel & Stick
  • Suitable for tile, stone, slate and marble floor finishes
  • Continuous metallic earth screen to ensure electrical safety
  • Low build height - Minimal floor height build up
  • Suitable for use in wet areas
  • EMC Safe
  • LIFETIME WARRANTY

Click here for: ThermRite Mat Installation Instructions 150 Watts

PREMIUM Manifold System – with Auto Air Vents and Temperature Gauges

£80.00£240.00 Excluding VAT

Premium Stainless Steel, ThermRite™ Dualmix Manifold Assembly with Automatic Air Vents and Temperature Gauges

- Pre-Assembled onto brackets for easy install

- Supplied complete with pipe connector cores 

Click Here For: PRODUCT DATA SHEET

Manifold Assembly Includes:

  • Pre-Assmbled onto brackets for easy install
  • 2 x Manifold body (flow and return)
  • Lockshields with flow meters on each port (0-5 l/min)
  • 2 x Isolation ball valves with temp gauge
  • Manual adjustment valves on each port (interchangeable to actuators)
  • 2 x Water drain/fill valves with blank cap
  • 2 x Automatic air vent with manual bleed
  • 2 x Metal fixing brackets
  • Pipe connectors (Eurocone Pipe Connectors)
  • Installation manual

18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly

£8.61 Excluding VAT

Ultra Low, Tile Direct, Overlay System for Existing Floors

The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top

Features:

  • Low Profile (18mm)
  • High Compressive Strength (300kPa)
  • Tile Directly On Top

Specification:

  • Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
  • Construction:XPS - Grade 300 kPa
  • Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
  • For 12mm Pipe
Minimum order: 8 Boards

4 x Panels – 18mm ThermRite™ HIGH OUTPUT Low Profile Floor Panel – 4 Grooves at 150mm Centres – Accepts Tile or Wood Floors Directly

£5.45 Excluding VAT

Discounted Due to Previous Stock Variation - 4 x Panels Available Only

Ultra Low, Tile Direct, Overlay System for Existing Floors

The ideal solution for laying an underfloor heating system onto an existing floor & tiling directly on top

Features:

  • Low Profile (18mm)
  • High Compressive Strength (300kPa)
  • Tile Directly On Top

Specification:

  • Size: Length- 1200, Width- 600, Depth- 18mm (Each panel = 0.72m²)
  • Construction:XPS - Grade 300 kPa
  • Design: 4 grooves @ 150mm centres + 'bulb' returns with 3 straight runs at the top of each panel for flow and returns
  • For 12mm Pipe
4 x Panels Available Only