Description
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system.
Compatible with any of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.
1 actuator is required for each zone.
The use of electrothermic actuators instead of pure thermostatic actuators allows remote control if required.
The Electrothermic Manifold Actuator is the ideal solution for individual room/zone control.
The actuator automatically opens/closes according to a signal received from the relevant zone thermostat.
Actuator features include:
- Power Supply: 230/240 volt
- Protection rating: IP54
- Threaded ring nut M30 x 1.5.
- Normally Closed (N.C.).
- Stroke : 3.5mm +/-0.5
- Power cable : 1 metre
- Opening time :120 sec (start).- 180 sec (finish)
- Power consumption : 2W