ECOFILM PRO is a complete heating solution in a box for laminate and wood floors ECOFILM PRO Professional Underfloor Heating Kits are available in 5m2,10m2, 15m2 and 20m2 kits and include all the tools for the professional installer. Simply cut the roll of 500mm wide ECOFILM into lengths and make the connections using the FREE crimp tool.Designed for professional installers, these kits must be installed by a qualified electrician

Analogue Room Thermostat – TH131

£33.48 Excluding VAT

The TH131 is an electronic thermostat developed for optimal regulation of underfloor heating systems.

The TH131 is a simple to use thermostat. Temperature control is via a simple analogue dial. The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor.

Click Here For: TH131 Product Manual

Digital Room Thermostat – TH232

£64.95 Excluding VAT

The TH232 is an electronic thermostat developed for optimal regulation of electric underfloor heating systems.

The TH232 is a simple to use thermostat. Temperature control options are both manual and fully programmable controls are available, allowing you flexibility of the product. The thermostat has three modes of operation. Choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor. The TH232 is supplied in polar white with a 3m floor sensor cable.

Wireless 7 Day Programmable Room Thermostat – V22

£49.40 Excluding VAT

The V22 Wireless Programmable Thermostat is designed to provide wireless time and temperature control to heating systems

Wall or Stand mounted (Supplied with stand) The V22 is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.

High Specification Adhesive Tape

£6.40 Excluding VAT

High Specification Adhesive Tape - suitable for high temperatures - 50mm x 50 metre

Used for taping joints in insulation boards and taping down cables and mats.

Programmable Electric Floor Heating Thermostat – Heatmiser Slimline-E V3

£70.00 Excluding VAT

The Heatmiser Slimline-E V2 floor heating thermostat has been designed specifically with electric floor heating in mind

The Heatmiser Slimline-e is our electric floor heating model, capable of switching up to 16A. The Slimline-e can be set to work as a non programmable, 5/2 day or 7 day programmable thermostat. A 3M remote floor sensor is provided. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.

Click Here For: Slimline-E V3 Product Manual

Flexel Touch – Electric Floor Heating Thermostat

£62.93£73.78 Excluding VAT

The new Touch is designed to be the simplest to use electric underfloor heating control available.

The Touch comes packed with innovative features to optimise your comfort and minimise running costs with the simplest touch screen interface. A large full colour backlit touch screen provides simple programming by guiding you through program setup and adjustment - no need for any complicated instruction manual.

Click Here For: Flexel Touch Product Manual

Polyester Vapour Barrier – 1.0 Metre Wide

£24.02£37.17 Excluding VAT

Polyester Vapour Barrier - The essential top layer of your Eco Film system 1.0m Wide

Wireless Receiver Unit – V23

£49.40 Excluding VAT

The V23 receiver is a Wall mounting receiver, specially designed to control electrical floor heating in combination with either the V22 Thermostat and/or V24 Central Controller.

It is ideal for use in renovation projects where it is impractical to run wires from the room thermostat to the heating appliance being controlled. Ideal for control of all types of electric heating systems; underfloor, radiant panels, convector heaters or ceiling heating.

6mm Ecomax Lite Insulation – Pack

£17.55£72.75 Excluding VAT

6mm Insulation Panel designed to be used with our Ecofilm and Ecofoil under wood and laminate systems.

A specifically designed closed cell foamed polystyrene insulation material for use below wood, laminate and engineered boards.

ECOMAX-DUO dual board overlay system

£47.58 Excluding VAT

The Ideal solution for underfloor heating below carpets and vinyl

Dimensions - 600mm x 1200mm

Pack contents - 4 base boards & 4 top boards (Pack Coverage: 2.88m2)

ECOMAX-DUO is a dual board overlay system suitable for use over our ECOFILM underfloor heating. It is a dry lay system that creates a free floating sub-floor that is extremely stable and is instantly ready to receive the finished floor covering ECOMAX-DUO provides a smooth stable laying surface onto which most finished floor coverings can be fixed. This enables ECOFILM elements to be used as the underfloor heat source for a variety of floor coverings such as carpet, linoleum and luxury vinyl.

Installation of ECOMAX-DUO is quick, clean and simple, the system consists of a baseboard and top board, each with a layer of contact adhesive.

HomeKit-Enabled Heatmiser neoHub Gen 2

£89.00 Excluding VAT

Heatmiser neoHub is the gateway to the Neo System

The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Click for: Product Installation & Data Sheet

Electric Floor Heating Touchscreen Room Thermostat – Heatmiser Touch-E v2

£58.87 Excluding VAT

The Heatmiser Touch-e is our touchscreen electric floor heating thermostat

Our touchscreen electric floor heating model, capable of switching up to 16A and the touchscreen interface makes interacting with the heating system easy. The Touch-e V2 is compatible with our wireless air sensor and window switch, offering a more flexible energy efficient control solution. NOTE: This thermostat can be operated in Built-in Air Sensor mode, to enable control of electric heaters/radiators without the need for the floor sensor.

Click Here For: Touch-E V2 Product Manual