Individual Wireless Thermostats
Heatmiser Sensor Probe
Remote Air/Floor Sensor Probe
The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats
Heatmiser neoAir Stand
Watts Underfloor Heating Electrothermic Manifold Actuator
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
- Compatible with all of our manifolds and thermostats
- Actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Heatmiser Underfloor Heating Manifold Actuator
Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system
- Compatible with all of our manifolds and thermostats
- Actuators are the ideal solution when individual control of each zone/room is required.
Click Here For: Actuator Datasheet
Heatmiser Thimble Sensor
Discreet Temperature Monitoring
The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.Click for: Product Installation & Data Sheet
External Aerial for Heatmiser UH8-RF – Heatmiser EA1
Extend your wireless signals
Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard. It is also perfect for extending the RF coverage within your property.
Two Channel Wireless Receiver – Heatmiser RF Switch V2
Wireless 2 Channel Receiver
The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.Click for: Product Installation & Data Sheet
Wireless Thermostat – Heatmiser Slimline-RF V3
A wireless solution to control your underfloor heating
The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.Click Here For: Slimline-RF Product Manual
Heatmiser Boost – Neo & RF Series Repeater
Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat
A smarter way to control your underfloor heating from anywhere via your smartphone
The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water. Both the UH8-RF and RF Switch receivers are compatible with the neoAir.Click for: Product Installation & Data Sheet
