Wireless Thermostat & Receiver – Slimline-RF Kit V3

£65.99 Excluding VAT

A wireless solution to control your underfloor heating

The Heatmiser Slimline-RF Kit comprises of a Heatmiser Slimline-RF Multi Mode Thermostat and RF-Switch wireless receiver. The receiver is hard wired to the boiler, so is normally positioned next to the boiler or you could use the existing thermostat cabling. The wireless thermostat is then wall mounted within range of the receiver (up to 100 meters open space)

Click Here For: Slimline-RF Product Manual

Click Here For: RF Switch Product Manual

Heatmiser Wireless App Controllable Thermostat Kit – neoAir Bundle V3

£135.34 Excluding VAT

A smarter wireless way to control your underfloor heating from anywhere via your smartphone.

The Heatmiser neoAir V3 Bundle includes a NeoAir V3-M, RF Switch and Desk Stand and is perfect for those looking for a wireless thermostat solution, whilst allowing you to take control of your heating and hot water from anywhere via your smartphone (a NeoHub will need to be purchased seperately to enable the APP Contol facility)

Click Here For: NeoAir V3-M Product Manual

Click Here For: RF Switch Product Manual

Heatmiser Thimble Sensor

£11.45 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Boost – Neo & RF Series Repeater

£40.55 Excluding VAT

Boost your Wireless and Neo signals

The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.

Heatmiser Underfloor Heating Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

  • Compatible with all of our manifolds and thermostats
  • Actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Watts Underfloor Heating Electrothermic Manifold Actuator

£9.95 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

  • Compatible with all of our manifolds and thermostats
  • Actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser Sensor Probe

£4.95 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats