Wall Plate for neoStat

£2.65 Excluding VAT

Optional Wall plate for Heatmiser neoStat

Add to basket

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.

This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats

Add to basket

Heatmiser Sensor Probe Housing – EN030

£5.05 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe

Dimensions 80Wx 80H x 22D mm

Add to basket

Heatmiser neoAir Stand

£6.99 Excluding VAT

The Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.

Colour: White

Add to basket

Electrothermic Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Add to basket

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.

Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.

The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Add to basket

Heatmiser Wireless Air Sensor

£12.25 Excluding VAT

A Wireless Air Sensor for optimum control of your heating system

The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required.

The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Air Sensor Datasheet

Add to basket

Heatmiser Wireless Window/Door Switch

£15.20 Excluding VAT

A Wireless Window/Door Sensor for optimum control of your heating system

The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened.

The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Contact Sensor Datasheet

Add to basket