Heatmiser Wireless Air Sensor

£11.95 Excluding VAT

A Wireless Air Sensor for optimum control of your heating system

The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Air Sensor Datasheet

Heatmiser Wireless Window/Door Switch

£14.95 Excluding VAT

A Wireless Window/Door Sensor for optimum control of your heating system

The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened. The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Contact Sensor Datasheet

Heatmiser Thimble Sensor

£10.28 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Sensor Probe Housing – EN030

£4.95 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm

Metal Single Gang Thermostat Back Box

£1.49 Excluding VAT
Thermostat flush box for solid wall installations
35mm Metal Single gang back box

Dry Lining Easy Fix Box

£1.49 Excluding VAT
Thermostat flush box for Dy Lining / Plasterboard wall installations
35mm Plastic Single gang fastafix back box

Wall Plate for neoStat

£1.45 Excluding VAT
Optional Wall plate for Heatmiser neoStat

Heatmiser neoAir Stand

£6.40 Excluding VAT

The Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.

Colour: White

Electrothermic Manifold Actuator

£10.75 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser Sensor Probe

£4.45 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats

External Aerial for Heatmiser UH8-RF – Heatmiser EA1

£14.75 Excluding VAT

Extend your wireless signals

Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard. It is also perfect for extending the RF coverage within your property.