Electrothermic Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat

£48.25 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water. Both the UH8-RF and RF Switch receivers are compatible with the neoAir.

Click for: Product Installation & Data Sheet

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats

Wireless Thermostat – Heatmiser Slimline-RF V3

£34.75 Excluding VAT

A wireless solution to control your underfloor heating

The Heatmiser Slimline-RF V3 wireless thermostat works with the Heatmiser RF Switch & UH8-RF Wireless Wiring Centre. The wireless thermostat is designed to be wall mounted in the area being controlled, up to 100 meters open space from the receiver.

Click Here For: Slimline-RF Product Manual

HomeKit-Enabled Heatmiser neoHub Gen 2

£88.95 Excluding VAT

Heatmiser neoHub is the gateway to the Neo System

The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Click for: Product Installation & Data Sheet

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Sensor Probe Housing – EN030

£5.05 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm

Heatmiser neoAir Stand

£6.99 Excluding VAT

The Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.

Colour: White

Heatmiser Wireless Air Sensor

£12.25 Excluding VAT

A Wireless Air Sensor for optimum control of your heating system

The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Air Sensor Datasheet

Two Channel Wireless Receiver – Heatmiser RF Switch V2

£28.60 Excluding VAT

Wireless 2 Channel Receiver

The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.

Click for: Product Installation & Data Sheet

Wall Plate for neoStat

£2.65 Excluding VAT
Optional Wall plate for Heatmiser neoStat

Heatmiser Boost – Neo & RF Series Repeater

£40.55 Excluding VAT

Boost your Wireless and Neo signals

The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.