Heatmiser neoStat V2 – Programmable Thermostat

£45.25 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.

Click for: Product Installation & Data Sheet

Heatmiser neoStat-hw V2 – Hot Water Programmer

£55.95 Excluding VAT

A smarter way to control your hot water from anywhere via your smartphone.

The neoStat-hw V2 is a 230v powered timer and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.

Click for: Product Installation & Data Sheet

Heatmiser neoUltra Thermostat & Central Control

£94.20 Excluding VAT

Central control of your neo system

The neoUltra has been designed to work as a standalone thermostat, or as part of an app controlled Neo System. In addition, the neoUltra can operate as a central controller for your Neo System, providing a single point of access to all of the neoStat, neoAir & neoPlug in your home.

Click for: Product Installation & Data Sheet

Heatmiser Thimble Sensor

£10.28 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Sensor Probe Housing – EN030

£4.95 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm

Heatmiser 4 Zone Wiring Centre – UH4

£42.57 Excluding VAT

Our 4 zone wiring centre for optimum control of your underfloor heating system

The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH4 Dimensions 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser 6 Zone Compact Wiring Centre – UH6

£48.15 Excluding VAT

Our 6 zone compact wiring centre for optimum control of your underfloor heating system

The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 4 actuators can be connected to each zone.

Features:

  • Central wiring for up to 6 zones
  • DIN Rail Mounting Option (DIN Rail not included)
  • Output for underfloor heating valve and pump activated when any thermostat calls for heat
  • Actuator outputs: 230v
  • Dimensions (LxHxD) 265x95mm

Click for: Product Installation & Data Sheet

HomeKit-Enabled Heatmiser neoHub Gen 2

£89.00 Excluding VAT

Heatmiser neoHub is the gateway to the Neo System

The Heatmiser neoHub provides remote control of all neoStat's and neoPlug's from your iOS, Android and Windows 10 device. The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Click for: Product Installation & Data Sheet

Heatmiser 8 Zone Wiring Centre – UH8

£49.48 Excluding VAT

Our 8 zone wiring centre for optimum control of your underfloor heating system

The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser Boost – Neo & RF Series Repeater

£33.10 Excluding VAT

Boost your Wireless and Neo signals

The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.

Electrothermic Manifold Actuator

£11.45 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser Sensor Probe

£4.45 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats