Heatmiser neoStat 12v V2 – Programmable Thermostat

£54.95 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

This Heatmiser neoStat is 12v powered and is the ideal upgrade route for those wanting app control and that have existing low voltage cabling installed. neoStat 12v are compatible with our 12v Wiring Centre UH8-N.

Click for: Product Installation & Data Sheet

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly.

Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall.

The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Add to basket

Heatmiser Sensor Probe Housing – EN030

£5.05 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe

Dimensions 80Wx 80H x 22D mm

Add to basket

HomeKit-Enabled Heatmiser neoHub Gen 2

£88.95 Excluding VAT

Heatmiser neoHub is the gateway to the Neo System

The Heatmiser neoHub provides remote control of all neoStat’s and neoPlug’s from your iOS, Android and Windows 10 device.

The Heatmiser neoHub connects to your home broadband router and wirelessly to the neoStats in your home. No special computer knowledge is required, simply plug into your router, create a FREE account via the Neo app and then take control of your heating, hot water and appliances from anywhere.

Click for: Product Installation & Data Sheet

Add to basket

Heatmiser Boost – Neo & RF Series Repeater

£40.55 Excluding VAT

Boost your Wireless and Neo signals

The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.

Add to basket

Electrothermic Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Add to basket

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor.

This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.
Suitable for all Heatmiser Thermostats

Add to basket