Heatmiser neoStat V2 – Programmable Thermostat

£46.80 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The neoStat V2 is a 230v powered programmable thermostat and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.

Click for: Product Installation & Data Sheet

Heatmiser 4 Zone Wiring Centre – UH4

£42.57 Excluding VAT

Our 4 zone wiring centre for optimum control of your underfloor heating system

The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH4 Dimensions 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser neoAir V3-M Wireless Programmable Smart Thermostat

£48.25 Excluding VAT

A smarter way to control your underfloor heating from anywhere via your smartphone

The neoAir is ideal for those looking for a totally wire free App controllable solution of your heating & hot water. Both the UH8-RF and RF Switch receivers are compatible with the neoAir.

Click for: Product Installation & Data Sheet

Heatmiser Wireless Air Sensor

£12.25 Excluding VAT

A Wireless Air Sensor for optimum control of your heating system

The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Air Sensor Datasheet

Heatmiser 6 Zone Compact Wiring Centre – UH6

£49.50 Excluding VAT

Our 6 zone compact wiring centre for optimum control of your underfloor heating system

The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 4 actuators can be connected to each zone.

Features:

  • Central wiring for up to 6 zones
  • DIN Rail Mounting Option (DIN Rail not included)
  • Output for underfloor heating valve and pump activated when any thermostat calls for heat
  • Actuator outputs: 230v
  • Dimensions (LxHxD) 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser neoPlug – Smart Plug

£39.95 Excluding VAT

Expand your Neo System with neoPlug and control your Appliances from Anywhere!

With the Heatmiser neoPlug you can control the appliance manually from the neoApp or you can program switching times via the app that the appliance will follow. With the latest apps for Android, Windows 10 and iOS, users can include the neoPlug in their Geo Location triggers, so the appliance can turn on when you get close to home or when you leave.

Click Here For: NeoPlug Data Sheet

Heatmiser neoStat-hw V2 – Hot Water Programmer

£45.50 Excluding VAT

A smarter way to control your hot water from anywhere via your smartphone.

The neoStat-hw V2 is a 230v powered timer and communicates to the neoHub and other neoStats within your home, to create a fully controllable network system of your home heating.

Click for: Product Installation & Data Sheet

Heatmiser Wireless Window/Door Switch

£15.20 Excluding VAT

A Wireless Window/Door Sensor for optimum control of your heating system

The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened. The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Contact Sensor Datasheet

Heatmiser 8 Zone Wiring Centre – UH8

£49.48 Excluding VAT

Our 8 zone wiring centre for optimum control of your underfloor heating system

The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Sensor Probe Housing – EN030

£5.05 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm

Wall Plate for neoStat

£2.65 Excluding VAT
Optional Wall plate for Heatmiser neoStat

Two Channel Wireless Receiver – Heatmiser RF Switch V2

£28.60 Excluding VAT

Wireless 2 Channel Receiver

The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.

Click for: Product Installation & Data Sheet

Heatmiser Boost – Neo & RF Series Repeater

£40.55 Excluding VAT

Boost your Wireless and Neo signals

The Heatmiser Boost is our Neo & RF Series Repeater. The Boost is surface mount for easy installation and can be used to repeat the RF and Neo Data signals.

Heatmiser neoAir Stand

£6.99 Excluding VAT

The Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.

Colour: White

Electrothermic Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats

External Aerial for Heatmiser UH8-RF – Heatmiser EA1

£20.55 Excluding VAT

Extend your wireless signals

Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard. It is also perfect for extending the RF coverage within your property.