Find the right thermostat for your home: From programmable to voice controlled smart options.

Showing 1–12 of 40 results

Wall Plate for neoStat

£2.65 Excluding VAT
Optional Wall plate for Heatmiser neoStat

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats

Heatmiser Sensor Probe Housing – EN030

£5.05 Excluding VAT

Room Sensor Enclosure

Housing for discreet location of the sensor probe Dimensions 80Wx 80H x 22D mm

Heatmiser neoAir Stand

£6.99 Excluding VAT

The Heatmiser neoAir Stand has been specifically designed for the neoAir, allowing you to position the neoAir thermostat on a table.

Colour: White

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Heatmiser Wireless Air Sensor

£12.25 Excluding VAT

A Wireless Air Sensor for optimum control of your heating system

The Wireless Air Sensor can be used with the Touch V2, Edge and Neo System and can be used as a single temperature sensor or as part of a group when an averaged temperature reading is required. The Wireless Air Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Air Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Air Sensor Datasheet

Heatmiser Dial Thermostat – DS1 V2

£14.99 Excluding VAT

A Dial Type Room Thermostat for controlling individual zones of your floor heating system

The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. Includes Optional Remote Air Sensing Mode

Click Here For: DS1 V2 Product Manual

Heatmiser Wireless Window/Door Switch

£15.20 Excluding VAT

A Wireless Window/Door Sensor for optimum control of your heating system

The Wireless Window / Door Sensor can be used with the Touch V2, Edge and Neo System and and is used to switch the heating off whenever a window or door is opened. The Wireless Sensor pairs directly with the Touch v2 and Edge whereas with the Neo System the Wireless Sensor is paired to the neoHub Gen 2 and then linked to the appropriate zone.

Click Here For: Wireless Contact Sensor Datasheet

External Aerial for Heatmiser UH8-RF – Heatmiser EA1

£20.55 Excluding VAT

Extend your wireless signals

Our external aerial is designed to work with our UH8-RF Wireless Wiring Centre. Radio Frequency (RF) communication is affected by metal objects and so this external aerial is ideal for those installations where the UH8-RF will be installed in a metal cupboard. It is also perfect for extending the RF coverage within your property.

Heatmiser Dial Thermostat with LCD DS1-L V2

£25.17 Excluding VAT

A Dial Type Room Thermostat for controlling individual zones of your floor heating system

The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.

Click Here For: DS1-L Product Manual

Heatmiser Set Back Thermostat DS-SB-V3

£26.85 Excluding VAT

A Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system

The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.

Click Here For: DS-SB Product Manual

Two Channel Wireless Receiver – Heatmiser RF Switch V2

£28.60 Excluding VAT

Wireless 2 Channel Receiver

The RF-Switch is our surface mount 2 channel wireless receiver. It is capable of controlling 1 heating zone and 1 hot water zone and provides a volt free output for the boiler. In addition, the RF Switch can be paired to the UH8-RF to provide a wireless link to the boiler.

Click for: Product Installation & Data Sheet