ADHESIVES & LEVELLERS
PROFLEX SP: Rapid Set Flexible Tile Adhesive – GREY
Fast Set Cementitious Tile adhesive - the ideal solution for bonding down our Solid Floor Insulation Panels (XPS)
UltraTileFix ProFlex SP is a single part, rapid setting, flexible adhesive for wall and floor tiles. It is specially formulated with enhanced adhesion and flexibility, making it ideal for areas where slight movement or vibration can occur. Classified as S1 in accordance with EN 12004 it has the high level of deformation for greater tolerance to movement.Specification:Â
- Ideal for use with porcelain, mosaic, natural stone and glass tiles
- S1 flexibility for timber floors, swimming pools and underfloor heating systems
- 3-20mm bed thickness
- 60 minutes pot life
- 2.5 hours set time
- 20kg : 4.2 - 4.5L mixing ratio
- Conforms to C2FT S1 EN 12004 and 12002 classification
- Size: 20kg
- Colour: Grey
- Lifetime guarantee
Click Here For: PRODUCT DATA SHEET
PROPRIMER – 1 Litre: Water Based Acrylic Primer
Advanced Polymer Primer - general use primer for both porous and non-porous surfaces• Can be used on walls or floors
• Designed for both porous and non-porous substrates
• Enhances adhesion and reduces substrate porosity
• Suitable for calcium sulphate screeds
• Suitable for Underfloor heating
• Internal surfaces
• Size: 1 Litre
• Coverage: 11m²
• Lifetime guarantee
Click Here For: PRODUCT DATA SHEET
PROLEVEL FIBRE: Reinforced Flexible Self Levelling Compound
High Strength Fibre Reinforced, Deep Fill Self Levelling Compound - the ideal solution for Self Levelling over our Profix Panel Systems
Specification:- 20kg Bag
- Coverage: Standard Levelling: 3mm layer: 1 Bag = 3.9m²
Click Here For: PRODUCT DATA SHEET
Ultra Level IT 2: Self Levelling Compound
Flexible Floor Levelling Compound - the ideal solution for Self Levelling over our ThermRite™ PRO and Solid Floor Insulation Panels
UltraTileFix ProLevel Two is a mid-strength smoothing underlayment. A two-component system consisting of a powdered blend of cements, graded fillers and additives, and a pre-gauged polymer liquid. Tiles can be applied to the internal subfloors in as little as 24 hours and its fast set time enables light foot traffic in 2.5 hours. Specification:- Internal use
- Convenient to mix
- Moisture tolerant
- Excellent flexibility for timber floors and underfloor heating systems
- 2-12mm depth
- 2.5 hours set time
- Tile after 24 hours
- 1 bag : 1 bottle mixing ratio
- Conforms to CT C25 F5 EN 13813 classification
- Size: 20kg & 4L
- Lifetime guarantee
