Heatmiser Touchscreen Programmable Thermostat - Touch V2

Heatmiser Touchscreen Programmable Thermostat - Touch V2

A Touchscreen digital room thermostat for controlling either individual or multiple zones of your floor heating system.

The Heatmiser Touch is the direct upgrade replacement for the PRT-TS, PRT-RPTS and DT-TS models of thermostat.
The Heatmiser Touch can be adjusted on site to enable it as either programmable or non-programmable. It can also be programmed to be air sensing or remote air sensing - for remote air sensing a Sensing Probe will need to be ordered seperately.

In programmable mode the Touch Thermostat features a 5/2 day or 7 day programmer. The Touch is a room stat and programmer in one, providing up to 4 different temperatures at different times of the day. It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required depending on the conditions in the building. In addition, this thermostat includes a keypad lock - so you can finally stop the fiddling.

Heatmiser Touch offers a great upgrade route for those with an existing dial thermostat or for those looking to measure the temperature remote from the thermostat.

With the Heatmiser Touch, a single or multiple Wireless Air Sensors can be paired to the thermostat. When multiple sensors are used, the average temperature is calculated and is perfect for larger open plan properties

In addition to the wireless air sensor, a wireless window/door switch can be paired to the Touch Thermostat, automatically switching the heating to Standby Mode whilst the window/door is open and then returning to normal mode when the window/door is closed.

The Heatmiser Touch can work in Thermostat or Timer mode. When operating in Heating Mode, the Heatmiser Touch can be paried to our Wireless Air Sensor where a number of options are available.
•Built in Air Sensor Only
•Built In Air and Wireless Air Temperature Averaging
•Single Remote Wireless Air Sensor Only
•Multiple Remote Wireless Sensors Averaging

•Modbus Connectivity
•Wireless Air Sensor Function
•Wireless Window/Door Switch Function
•Large Display
•Non Programmable, 5/2 day, 7 day or 24 hour programming (selectable in software)
•Heating or Timer Mode
•Self Learning Optimum Start
•4 or 6 Comfort Levels per Day (Selectable)
•Temperature Hold Facility
•Holiday Facility
•Automatic White Back-Lit Display (Turns off after 30 seconds)
•Flush Mounting
•C/F Selectable
•Key Locking
•Frost Protection
•Advance Function
•Floor Sensing Option (Probe not included)
•230v AC
•3A Switching

A maximum of 16 wireless air sensor and window/door switches can be paired to a single Touch v2 thermostat. Wireless Sensors are not included.

For Multi Zone control, this thermostat should be installed into each zone/room (1 per zone/room) and combined with either the - UH2 (4 Zone) wiring centre OR the UH3 (8 Zone wiring centre)
PLUS - Electrothermic manifold actuators (1 for each manifold port)

Our Price:48.90 Including Next Day Delivery
(58.68 Including VAT at 20%)