Heatmiser Slimline V2 - Digital Programmable Thermostat

Heatmiser Slimline V2 - Digital Programmable Thermostat

A digital room thermostat for controlling either individual or multiple zones of your floor heating system.

The Heatmiser Slimline is the direct upgrade replacement for the PRT, PRT-RP and DT models of thermostat.
The Heatmiser Slimline can be adjusted on site to enable it as either programmable or non-programmable. It can also be programmed to be air sensing or remote air sensing - for remote air sensing a Sensing Probe will need to be ordered seperately.

In programmable mode the Slimline Thermostat features a 5/2 day or 7 day programmer. The Slimline is a room stat and programmer in one, providing up to 4 different temperatures at different times of the day. It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required depending on the conditions in the building. In addition, this thermostat includes a keypad lock - so you can finally stop the fiddling.

For Multi Zone control, this thermostat should be installed into each zone/room (1 per zone/room) and combined with either the - UH2 (4 Zone) wiring centre OR the UH3 (8 Zone wiring centre)
PLUS - Electrothermic manifold actuators (1 for each manifold port)

For bathroom installation just add a seperate Sensor Probe or Thimble Sensor - this will connect into the back of this thermostat. The thermostat is then installed outside of the bathroom and the sensing probe passed through the wall into the bathroom - the probe can be left open in a discrete location or alternatively installed within our sensor housing.

Our Price:34.45 Including Next Day Delivery
(41.34 Including VAT at 20%)