Showing all 10 results

60mm High Grip Barbed Pipe Clips 100/pack

£2.10 Excluding VAT
60mm High Grip Barbed Pipe Clips 100/pack Specifically designed for installation into rigid insulation boards (such as Kingspan and Celotex). Clips are 60mm in length and offer high grip due to the barbed construction. Clips can be used individually and simply pushed into position or alternatively loaded into a pipe clipping tool. Minimum Order - 2 Packs (200 clips)

Pipe Fixing Clip Rail – Self-Adhesive Backing – 1.0 Metre Interlocking Lengths

£1.15 Excluding VAT

Pipe Fixing Clip Rail - Self Adhesive

Pipe Fixing Clip Rail - 1.00 metre long with self adhesive strip. Easy push in clipping of our 16mm pipe. 1.00 metre long lengths are interlocking and rail is fixed to the insulation with self adhesive strip. Minimum Order - 20 Lengths

Edge Insulation Roll – 50 metres

£19.75 Excluding VAT
Specifically designed to maximise efficiency and insulate heated screeds. Insulation ensures no heat loss into perimeter walls and allows for expansion and contraction of heated screeds. Has pre-attached plastic skirt for sealing when used with liquid screed.

Plastic Pipe Bending Elbow

£0.48 Excluding VAT
Used to assist bending our PE-RT EVOH Pipe Not required with our aluminium core PEX-Al-PEX or PERT-Al-PERT pipe. Minimum Order Quantity: 10

ThermRite™ Aluminium Single Spreader Plate

£2.59 Excluding VAT

Aluminium Heat Diffuser Plates - 1 Pipe Channel

Specifically designed to sit between joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 1 channel designed to locate 12 or 16mm heating pipes.

Specification:

  • Plate Size: 1.0 Metre long x 140mm wide.
  • High Output: Each plate is 0.5mm thick for maximum heat distribution.
Minimum Order: 35 Lengths

ThermRite™ Aluminium Double Spreader Plate

£4.35 Excluding VAT

Aluminium Heat Diffuser Plates - 2 Pipe Channels @ 200mm Pipe Centres

Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 2 channels 200mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.

Specification:

  • Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
  • High Output: Each plate is 0.5mm thick for maximum heat distribution.
  • Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)

Click Here For: PRODUCT DATA SHEET

ThermRite™ Aluminium Triple Spreader Plate

£4.99 Excluding VAT

Aluminium Heat Diffuser Plates - 3 Pipe Channels @ 150mm Pipe Centres

Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. Each plate has 3 channels 150mm apart, designed to locate 15 & 16mm heating pipes. The plates are designed to fit inside standard 400mm centre to centre joist spacings.

Specification:

  • Plate Size: 1.0 Metre long x 390mm wide x 20mm deep.
  • High Output: Each plate is 0.5mm thick for maximum heat distribution.
  • Coverage: 2.5 Plates / 1.0m²
Minimum Order: 20 Lengths (8.0m²)

Click Here For: PRODUCT DATA SHEET

ThermRite™ Fit From Below Aluminium Double Spreader Plate – 250mm Wide

£4.13 Excluding VAT

Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 250mm Wide Plates

Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation

Specification:

  • Plate Size: 1.0 Metre long x 250mm wide
  • High Output: Each plate is 0.5mm thick for maximum heat distribution.
  • Coverage: For Single run between 400mm centred joists: 2.5 Plates / 1.0m² For Double run between 600mm centred joists: 3.0 Plates / 1.0m²
  • Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths

ThermRite™ Fit From Below Aluminium Spreader Plate – 150mm Wide

£4.13 Excluding VAT

Fit From Below High Output Aluminium Heat Diffuser Plates - 2 Pipe Channels - 150mm Wide Plates

Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation

Specification:

  • Plate Size: 1.0 Metre long x 150mm wide
  • High Output: Each plate is 0.5mm thick for maximum heat distribution.
  • Coverage: (For Double run between 400mm and Triple run between 600mm centred joists): 5.0 Plates / 1.0m²
  • Each plate has 2 channels, designed to locate 15 & 16mm heating pipes.
Minimum Order: 20 Lengths

ThermRite™ Fit From Below Aluminium Single Spreader ‘J’ Plate – 180mm Wide

£3.50 Excluding VAT

Fit From Below High Output Aluminium Heat Diffuser Plates - 1 Pipe Channel - 180mm Wide Plate

Specifically designed to sit between standard joists to hold pipes and spread the heat in a joisted floor installation. The easy install option to fit your between joist underfloor heating without lifting the floor - designed to be fitted from below to the underside of the floor, to hold pipes and spread the heat in a joisted floor installation

Specification:

  • Plate Size: 1.0 Metre long x 180mm wide
  • High Output: Each plate is 0.5mm thick for maximum heat distribution.
  • Each plate has 1 channel, designed to locate 16mm heating pipes.
Minimum Order: 30 Lengths