Heatmiser Dial Thermostat – DS1 V2

£14.99 Excluding VAT

A Dial Type Room Thermostat for controlling individual zones of your floor heating system

The Heatmiser DS1 is our 230v, electronic room thermostat, ideal for conventional or combi-boiler systems. Includes Optional Remote Air Sensing Mode

Click Here For: DS1 V2 Product Manual

Heatmiser 4 Zone Wiring Centre – UH4

£42.57 Excluding VAT

Our 4 zone wiring centre for optimum control of your underfloor heating system

The Heatmiser UH4 can be used in conjunction with our mains thermostats. The UH4 provides central switching of up to 4 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 4 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH4 Dimensions 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser Dial Thermostat with LCD DS1-L V2

£25.17 Excluding VAT

A Dial Type Room Thermostat for controlling individual zones of your floor heating system

The Heatmiser DS1 is our 230v, electronic room thermostat incorporating an LCD. In normal operation, the actual room temperature is displayed on the LCD, rotating the dial will display the set temperature for 5 seconds.

Click Here For: DS1-L Product Manual

Heatmiser Set Back Thermostat DS-SB-V3

£26.85 Excluding VAT

A Dial Type Set Back Room Thermostat for controlling individual zones of your floor heating system

The Heatmiser DS-SB features a set back function, a function that will automatically reduce the set temperature by 4C when no time clock signal is detected therefore providing more flexible control of your heating.

Click Here For: DS-SB Product Manual

Heatmiser 6 Zone Compact Wiring Centre – UH6

£49.50 Excluding VAT

Our 6 zone compact wiring centre for optimum control of your underfloor heating system

The Heatmiser UH6 is our 6 Zone underfloor heating wiring centre designed to work with our 230v Thermostats. The UH6 wiring centre provides central switching and is therefore ideally situated next to the underfloor heating manifold. On demand from any zone, a 230v output is provided to switch the relevant zone actuators, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers. Up to 4 actuators can be connected to each zone.

Features:

  • Central wiring for up to 6 zones
  • DIN Rail Mounting Option (DIN Rail not included)
  • Output for underfloor heating valve and pump activated when any thermostat calls for heat
  • Actuator outputs: 230v
  • Dimensions (LxHxD) 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser 8 Zone Wiring Centre – UH8

£49.48 Excluding VAT

Our 8 zone wiring centre for optimum control of your underfloor heating system

The Heatmiser UH8 can be used in conjunction with our mains thermostats. The UH8 provides central switching of up to 8 zones as well as providing an output for a hot water cylinder, the system boiler and pump. When used for underfloor heating, an option is available to use zone 8 as a conventional radiator zone. Up to 6 actuators can be connected to each zone. UH8 Dimensions 384x148x60mm

Click for: Product Installation & Data Sheet

Heatmiser Thimble Sensor

£11.26 Excluding VAT

Discreet Temperature Monitoring

The Heatmiser Thimble Sensor is perfect for measuring the temperature in a room discreetly. Its small form factor means the sensor can be used in areas where the client wants no room thermostats mounted on the wall. The thimble sensor can be wired up to 20M away from the room thermostats.

Click for: Product Installation & Data Sheet

Electrothermic Manifold Actuator

£11.25 Excluding VAT

Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system

Compatible with all of our manifolds and thermostats the actuators are the ideal solution when individual control of each zone/room is required.

Click Here For: Actuator Datasheet

Heatmiser Sensor Probe

£4.60 Excluding VAT

Remote Air/Floor Sensor Probe

The 3M Remote sensor probe can be used with all of our thermostats that accept a remote sensor. It can be used to measure air or floor temperature and is specifically designed to be used as a floor sensor. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required. Suitable for all Heatmiser Thermostats