ThermostatsThere are 5 versions of thermostat available, all of which will ensure optimum comfort and control to your system.
All thermostats carry a 2 year guarantee.
All thermostats are supplied with a 3m floor heating probe and a length of probe protective conduit.
The TEGA TEMP has three modes of operation. You can choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor. It also benefits from easy 7 day programming.
The PRT-E incorporates a 5/2 day digital programmer. It is ideal for use in conjunction with bathroom installations. You can choose between room thermostat, floor thermostat or a combination of room thermostat with floor limit sensor. It can be installed outside of the bathroom, the floor probe is then run down and through the wall and fitted under the bathroom tiles.
Both the TH132AF & TH132F incorporate a 7 day digital programmer.
Click here to Enter Shop
| Heatmiser PRT-EWith comfort being priority, this electric underfloor heating thermostat offers complete control of your underfloor heating system. This combination model offers two modes of control. Air Only or Air & Floor.
The PRT-E is our electric underfloor heating thermostat offering 2 modes of operation, selectable in software by the installer. In either mode, the thermostat offers a 5/2 day program, allowing you to program 4 temperature levels for the weekday and 4 different at the weekend.
Mode 1: In this mode, the thermostat will maintain the floor temperature according to the temperature level set. This mode is ideal for bathrooms and kitchens.
Mode 2: In this mode, the thermostat will maintain the air temperature according to the temperature level set, but will also monitor the floor temperature from the remote sensor. Using the floor sensor and the adjustable floor limit setting, the thermostat restricts the floor from overheating.
- 13A switching --- 4 Comfort Level Settings --- Optimum Start --- Keylock Facility
- Floor & Air/Floor Modes --- 5/2 Program --- Adjustable frost setting --- 3 meter remote Sensor Supplied
If you are controlling under floor heating with a higher load than 13A, you should either use a contactor (available from our 'Thermostats & Contactors' Page) or alternatively choose the Tega Temp Electronic Thermostat or one of the Aube (TH132AF / TH132F) range of thermostats (capable of switching higher electrical loads).
Contact us for more information.
|  |
|  Aube TH132F / TH132AF
A digital dual function fully programmable controller fitted with either 1 (TH132F) or 2 (TH132AF) temperature sensors.
The TH132F version is fitted with a sensor to control the floor temperature and should be used for bathroom installations.
The TH132AF version is fitted with a second internal sensor, to monitor room ambient temperature.
Optimum start function calculates the most efficient start time for the system to achieve the required temperature at the programmed time.
Easy to programme and install. Single pole, 4 wire connection for flush mounting onto a standard 45mm deep electrical box or using an optional surface mounting box.
Protected memory, no batteries required.
Automatic memory with manual override if required. 4 daily programmes with separate 7 day settings, vocational programme and optional day and night temperature settings.
Proportional control at 15 minute intervals and based on previous performance controls the most efficient time for the heating system to operate during each heating period.
| Tega Temp Programmable Room ThermostatThe Tega Temp thermostat is a fully programmable electronic
thermostat developed specifically for the optimal regulation
of underfloor heating systems.
The Tega Temp has three modes of operation. You can choose
between room thermostat, floor thermostat or a combination
of room thermostat with floor limit sensor.
The Tega Temp has a large digital LED display with easy read
characters and is supplied with a floor sensor cable.
Floor Thermostat Mode: In this mode, the thermostat will maintain the floor temperature according to the temperature level set. This mode is ideal for bathrooms and kitchens.
Room Thermostat with Floor Limit Sensor: In this mode, the thermostat will maintain the air temperature according to the temperature level set, but will also monitor the floor temperature from the remote sensor. Using the floor sensor and the adjustable floor limit setting, the thermostat restricts the floor from overheating.
- 16A switching --- Fully Programmable --- Air/Floor & Air/Floor Modes --- Large Digital LED Display --- 3 metre Remote Sensor Supplied --- Conduit Supplied --- Floor Limit Protective Sensor |  |
|  EB100 Electronic Thermostat
Electronic multifunction thermostat supplied set to control floor temperature through a remote sensing probe and can be adjusted to control ‘ambient only’ or dual air and floor temperatures
12 amp 2760 watt switching load at 230 volts. Temperature variation +/- 0.5ºC
Temperature scale: Air + 0ºC to + 45ºC
Floor +15ºC to + 50ºC
2 pole isolator switch designed for flush mounting onto a standard electrical box and supplied with 2 alternative fixing pattresses.
Adjustable min / max temperature locking.
Dual LED display Green showing power supply operating
Red showing heating operating
Dimensions 78.9 x 83 x 20.7mm
|
Electric Underfloor Heating - Under Tile Heating - Under Wood Heating -Under Laminate Heating - Underfloor Insulation - Thermostats - Tile Adhesive |
URL Web Directory