Online Catalogue
Left bar graphic

THE FLOOR HEATING WAREHOUSE - The Uk's Premier Underfloor Heating Store

Hot Water Cylinders

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 180 Litres

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 180 Litres

Stainless Steel Unvented 180 Litre Mains Pressure Hot Water Cylinder

''The ideal companion to our Air Source Heat pumps''

This Stainless Steel Cylinder has been developed to maximise the lower temperatures available from an air source or ground source heat pump, and is also solar compatible. This specifically designed cylinder is manufactured from high grade stainless steel and incorporates all the necessary controls and expansion devices required to maximise efficiency and ensure ease of installation.


Features & Benefits:
- The latest and highest quality Duplex Stainless Steel.
- Fast reheat rate.
- One of the highest insulation ratings on offer today.
- Mains pressure hot water.
- Heat pump and solar compatible.
- Cold water inlet PRV combination valve/expansion relief
- Pressure and temperature relief valve
- Control thermostat
- Energy cut-out thermostat
- Energy cut-out motorised valve
- Tundish
- 3kW Immersion heater
- Expansion vessel/mounting bracket/fl exible hose
- Technical/user product literature
- 25 Year Manufacturers Guarantee
- Proven Technology
- Easy Maintenance
- Suitable for the Home and Workplace

Our Stainless Steel Heat Pump Cylinder is an unvented hot water storage cylinder fitted with two high efficiency internal primary heat exchangers especially designed for use with heat pump systems. These two heat exchangers can be connected in parallel to the heat pump circuit when a solar thermal system is not installed. When both heat pump and solar thermal systems are installed, the top heat exchanger is connected to the heat pump circuit and the bottom heat exchanger is connected to the solar circuit.
All of our cylinders are fitted with a 3kW (230Vac, 50Hz) immersion heater for raising the temperature of the stored water independently of the heat pump heating cycle if necessary.


Sizing Guide:
180 Litre Cylinder Ideally suited to: Properties up to 2-3 Bedrooms with 1 bathroom + 2 shower rooms (assuming heat pump supply only)

Click here for: Cylinder Information / Installation Guide


Our Price:£829.29 Including Next Day Delivery
(£995.15 Including VAT at 20%)


Quantity:  

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 210 Litres

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 210 Litres

Stainless Steel Unvented 210 Litre Mains Pressure Hot Water Cylinder

''The ideal companion to our Air Source Heat pumps''

This Stainless Steel Cylinder has been developed to maximise the lower temperatures available from an air source or ground source heat pump, and is also solar compatible. This specifically designed cylinder is manufactured from high grade stainless steel and incorporates all the necessary controls and expansion devices required to maximise efficiency and ensure ease of installation.


Features & Benefits:
- The latest and highest quality Duplex Stainless Steel.
- Fast reheat rate.
- One of the highest insulation ratings on offer today.
- Mains pressure hot water.
- Heat pump and solar compatible.
- Cold water inlet PRV combination valve/expansion relief
- Pressure and temperature relief valve
- Control thermostat
- Energy cut-out thermostat
- Energy cut-out motorised valve
- Tundish
- 3kW Immersion heater
- Expansion vessel/mounting bracket/fl exible hose
- Technical/user product literature
- 25 Year Manufacturers Guarantee
- Proven Technology
- Easy Maintenance
- Suitable for the Home and Workplace

Our Stainless Steel Heat Pump Cylinder is an unvented hot water storage cylinder fitted with two high efficiency internal primary heat exchangers especially designed for use with heat pump systems. These two heat exchangers can be connected in parallel to the heat pump circuit when a solar thermal system is not installed. When both heat pump and solar thermal systems are installed, the top heat exchanger is connected to the heat pump circuit and the bottom heat exchanger is connected to the solar circuit.
All of our cylinders are fitted with a 3kW (230Vac, 50Hz) immersion heater for raising the temperature of the stored water independently of the heat pump heating cycle if necessary.


Sizing Guide:
210 Litre Cylinder Ideally suited to: Properties up to 2-4 Bedrooms with 2 bathrooms + 1 shower room (assuming heat pump supply only)

Click here for: Cylinder Information / Installation Guide


Our Price:£872.50 Including Next Day Delivery
(£1,047.00 Including VAT at 20%)


Quantity:  

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 250 Litres

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 250 Litres

Stainless Steel Unvented 250 Litre Mains Pressure Hot Water Cylinder

''The ideal companion to our Air Source Heat pumps''

This Stainless Steel Cylinder has been developed to maximise the lower temperatures available from an air source or ground source heat pump, and is also solar compatible. This specifically designed cylinder is manufactured from high grade stainless steel and incorporates all the necessary controls and expansion devices required to maximise efficiency and ensure ease of installation.


Features & Benefits:
- The latest and highest quality Duplex Stainless Steel.
- Fast reheat rate.
- One of the highest insulation ratings on offer today.
- Mains pressure hot water.
- Heat pump and solar compatible.
- Cold water inlet PRV combination valve/expansion relief
- Pressure and temperature relief valve
- Control thermostat
- Energy cut-out thermostat
- Energy cut-out motorised valve
- Tundish
- 3kW Immersion heater
- Expansion vessel/mounting bracket/fl exible hose
- Technical/user product literature
- 25 Year Manufacturers Guarantee
- Proven Technology
- Easy Maintenance
- Suitable for the Home and Workplace

Our Stainless Steel Heat Pump Cylinder is an unvented hot water storage cylinder fitted with two high efficiency internal primary heat exchangers especially designed for use with heat pump systems. These two heat exchangers can be connected in parallel to the heat pump circuit when a solar thermal system is not installed. When both heat pump and solar thermal systems are installed, the top heat exchanger is connected to the heat pump circuit and the bottom heat exchanger is connected to the solar circuit.
All of our cylinders are fitted with a 3kW (230Vac, 50Hz) immersion heater for raising the temperature of the stored water independently of the heat pump heating cycle if necessary.


Sizing Guide:
250 Litre Cylinder Ideally suited to: Properties up to 2-4 Bedrooms with 2 bathrooms + 2 shower rooms (assuming heat pump supply only)

Click here for: Cylinder Information / Installation Guide


Our Price:£960.56 Including Next Day Delivery
(£1,152.67 Including VAT at 20%)


Quantity:  

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 300 Litres

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 300 Litres

Stainless Steel Unvented 300 Litre Mains Pressure Hot Water Cylinder

''The ideal companion to our Air Source Heat pumps''

This Stainless Steel Cylinder has been developed to maximise the lower temperatures available from an air source or ground source heat pump, and is also solar compatible. This specifically designed cylinder is manufactured from high grade stainless steel and incorporates all the necessary controls and expansion devices required to maximise efficiency and ensure ease of installation.


Features & Benefits:
- The latest and highest quality Duplex Stainless Steel.
- Fast reheat rate.
- One of the highest insulation ratings on offer today.
- Mains pressure hot water.
- Heat pump and solar compatible.
- Cold water inlet PRV combination valve/expansion relief
- Pressure and temperature relief valve
- Control thermostat
- Energy cut-out thermostat
- Energy cut-out motorised valve
- Tundish
- 3kW Immersion heater
- Expansion vessel/mounting bracket/fl exible hose
- Technical/user product literature
- 25 Year Manufacturers Guarantee
- Proven Technology
- Easy Maintenance
- Suitable for the Home and Workplace

Our Stainless Steel Heat Pump Cylinder is an unvented hot water storage cylinder fitted with two high efficiency internal primary heat exchangers especially designed for use with heat pump systems. These two heat exchangers can be connected in parallel to the heat pump circuit when a solar thermal system is not installed. When both heat pump and solar thermal systems are installed, the top heat exchanger is connected to the heat pump circuit and the bottom heat exchanger is connected to the solar circuit.
All of our cylinders are fitted with a 3kW (230Vac, 50Hz) immersion heater for raising the temperature of the stored water independently of the heat pump heating cycle if necessary.


Sizing Guide:
300 Litre Cylinder Ideally suited to: Properties up to 3-5 Bedrooms with 2 bathrooms + 2 shower rooms (assuming heat pump supply only)

Click here for: Cylinder Information / Installation Guide


Our Price:£1,047.00 Including Next Day Delivery
(£1,256.40 Including VAT at 20%)


Quantity:  

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 400 Litres

Stainless Steel - Heat Pump Unvented Mains Pressure Cylinder -- 400 Litres

Stainless Steel Unvented 400 Litre Mains Pressure Hot Water Cylinder

''The ideal companion to our Air Source Heat pumps''

This Stainless Steel Cylinder has been developed to maximise the lower temperatures available from an air source or ground source heat pump, and is also solar compatible. This specifically designed cylinder is manufactured from high grade stainless steel and incorporates all the necessary controls and expansion devices required to maximise efficiency and ensure ease of installation.


Features & Benefits:
- The latest and highest quality Duplex Stainless Steel.
- Fast reheat rate.
- One of the highest insulation ratings on offer today.
- Mains pressure hot water.
- Heat pump and solar compatible.
- Cold water inlet PRV combination valve/expansion relief
- Pressure and temperature relief valve
- Control thermostat
- Energy cut-out thermostat
- Energy cut-out motorised valve
- Tundish
- 3kW Immersion heater
- Expansion vessel/mounting bracket/fl exible hose
- Technical/user product literature
- 25 Year Manufacturers Guarantee
- Proven Technology
- Easy Maintenance
- Suitable for the Home and Workplace

Our Stainless Steel Heat Pump Cylinder is an unvented hot water storage cylinder fitted with two high efficiency internal primary heat exchangers especially designed for use with heat pump systems. These two heat exchangers can be connected in parallel to the heat pump circuit when a solar thermal system is not installed. When both heat pump and solar thermal systems are installed, the top heat exchanger is connected to the heat pump circuit and the bottom heat exchanger is connected to the solar circuit.
All of our cylinders are fitted with a 3kW (230Vac, 50Hz) immersion heater for raising the temperature of the stored water independently of the heat pump heating cycle if necessary.


Sizing Guide:
400 Litre Cylinder Ideally suited to: Properties up to 4-5 Bedrooms with 2 bathrooms + 3 shower rooms (assuming heat pump supply only)

Click here for: Cylinder Information / Installation Guide


Our Price:£1,309.54 Including Next Day Delivery
(£1,571.45 Including VAT at 20%)


Quantity:  

Warm Water & Electric Underfloor Heating - Under Tile Heating - Under Wood Heating -Under Laminate Heating - Underfloor Insulation - Thermostats - Pex-Al-Pex Pipe - Pipe Fittings - Manifolds