1. Home
  2. Login
  3. Recent Orders
  4. View Cart
  5. Checkout
Call: 01481 242727

Professional Design - Supply - Consultation

Digital Thermostats

Digital Programmable Thermostat -- Slimline

Digital Programmable Thermostat -- Slimline

Click here for: Detailed Product Information

A digital room thermostat for controlling either individual or multiple zones of your floor heating system.

The Heatmiser Slimline is the direct upgrade replacement for the PRT, PRT-RP and DT models of thermostat.
The Heatmiser Slimline can be adjusted on site to enable it as either programmable or non-programmable. It can also be programmed to be air sensing or remote air sensing - for remote air sensing a Sensing Probe will need to be ordered seperately.

In programmable mode the Slimline Thermostat features a 5/2 day or 7 day programmer. The Slimline is a room stat and programmer in one, providing up to 4 different temperatures at different times of the day. It includes Optimum Start which is an energy saving feature designed to reduce the amount of heat up time required depending on the conditions in the building. In addition, this thermostat includes a keypad lock - so you can finally stop the fiddling.

For Multi Zone control, this thermostat should be installed into each zone/room (1 per zone/room) and combined with either the - UH2 (4 Zone) wiring centre OR the UH3 (8 Zone wiring centre)
PLUS - Electrothermic manifold actuators (1 for each manifold port)

For bathroom installation just add a seperate Sensor Probe or Thimble Sensor - this will connect into the back of this thermostat. The thermostat is then installed outside of the bathroom and the sensing probe passed through the wall into the bathroom - the probe can be left open in a discrete location or alternatively installed within our sensor housing.



Our Price:34.55 Including Next Day Delivery
(41.46 Including VAT at 20%)

12v Network Programmable Multi Mode Thermostat inc Hotwater - Heatmiser Slimline-HW-N

12v Network Programmable Multi Mode Thermostat inc Hotwater - Heatmiser Slimline-HW-N

Click here for: Detailed Product Information

A 12 volt Network digital room thermostat for controlling either individual or multiple zones of your floor heating system and incorporating seperate time control for your hot water cylinder with the Heatmiser UH1 wiring centre. Also compatible with the Touchpad and network products.

The Heatmiser Slimline-HWN is the direct upgrade replacement for the PRT/HW-N thermostat.
The Heatmiser Slimline-HWN can be adjusted on site to enable it as either programmable or non-programmable.

In programmable mode the Slimline-HWN is a room thermostat and hot water timer in one and features a 5/2 day or 7 day thermostat programmer, with an additional 5/2 / 7day program for a domestic hot water cylinder. Reduced costs and wiring means the Slimline-HWN really is an all-in-one solution.




Our Price:39.75 Including Next Day Delivery
(47.70 Including VAT at 20%)

Heatmiser Sensor Probe

Heatmiser Sensor Probe

Remote Air/Floor Sensor Probe

This sensor can be used to measure air and floor temperature. This probe is supplied with a 3 meter cable which can be extended to 20 meters if required.

Suitable for all Heatmiser Thermostats



Our Price:4.65 Including Next Day Delivery
(5.58 Including VAT at 20%)

Heatmiser Thimble Sensor

Heatmiser Thimble Sensor

Discreet Temperature Monitoring

The New Heatmiser Thimble Sensor is compatible with all Heatmiser Thermostats with a remote sensor connection.

The Thimble Sensor is supplied with a 1.5M cable which can be extended to 20M.

This thimble sensor has been designed to be as small as possible to allow for discreet temperature measuring. The sensor is 10mm wide (excluding collar) and has a depth from the wall of 18mm.



Our Price:10.28 Including Next Day Delivery
(12.34 Including VAT at 20%)

Sensor Probe Housing - EN-030

Sensor Probe Housing - EN-030

Room Sensor Enclosure

Dimensions
80Wx 80H x 22D mm


The ideal enclosure for use with thermostats with remote air sensors such as our PRT-RP



Our Price:4.95 Including Next Day Delivery
(5.94 Including VAT at 20%)

4 Zone Wiring Centre - UH4

4 Zone Wiring Centre - UH4

Click here for: Detailed Product Information

Our 4 zone wiring centre for optimum control of your complete heating system.

The Heatmiser UH4 is designed to work with our Slimline and Touch mains thermostats but equally could be used with any 230v room thermostat. The UH4 is also ideally suited for underfloor heating.

Up to 4 zones can be controlled from the UH4. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

A simple slide switch makes zone 4 suitable for controlling a radiator zone. When used for controlling radiators, zone 4 does not enable the underfloor heating pump, valve and boiler.Up to 4 actuators can be connected to each zone.

Dimensions (WxHxD) 384x148x60mm
The UH4 is a direct replacement for the UH2 Wiring centre



Our Price:42.57 Including Next Day Delivery
(51.08 Including VAT at 20%)

8 Zone Wiring Centre - UH8

8 Zone Wiring Centre - UH8

Click here for: Detailed Product Information

Our 8 zone wiring centre for optimum control of your complete heating system.

The Heatmiser UH8 is designed to work with our Slimline and Touch mains thermostats, our 4 channel 230v time clock (TM4) and 230v Set back thermostat (DS-SB) but equally could be used with any 230v room thermostat.

Up to 8 zones can be controlled from the UH8. On board the UH8 are two heating time channels, each zone allows you to specify which time channel it should follow. 2 additional time channel connections are provided for hot water control or other auxiliary devices. On demand from any zone, a 230v output is provided to switch the relevant zone actuator, underfloor heating pump and valve. A volt free connection is supplied for the boiler, making it compatible with almost all types of boilers.

A simple slide switch makes zone 8 suitable for controlling a radiator zone. When used for controlling radiators, zone 8 does not enable the underfloor heating pump, valve and boiler.Up to 4 actuators can be connected to each zone.

Dimensions (WxHxD) 384x148x60mm
The UH8 is a direct replacement for the UH3 Wiring centre



Our Price:49.48 Including Next Day Delivery
(59.38 Including VAT at 20%)

Electrothermic Manifold Actuator

Electrothermic Manifold Actuator


Manifold Actuators, are installed onto the manifold and used to automatically open or close the water flow to a particular zone/room on your system.
Compatible with any of our thermostats the actuators are the ideal solution when individual control of each zone/room is required.


1 actuator is required for each zone.
The use of electrothermic actuators instead of pure thermostatic actuators allows remote control if required.



Our Price:11.65 Including Next Day Delivery
(13.98 Including VAT at 20%)